RAGNACUT 401 PFC
The RagnaCut 401 PFC is a multi-voltage single phase inverter power source for Air Plasma Cutting process.
Special no-hf cutting torch with pilot arc allows 25mm maximum cuts on mild steel, making this model the most performant, compared to other plasma cutters on the market.
The PFC module allows multiple advantages such as reduced power consumption, increased efficiency, increased duty cycle (40A @ 50%) and multi-voltage capability (works with any voltage between 95V and 270V).
RAGNACUT 401 PFC
The RagnaCut 401 PFC is a multi-voltage single phase inverter power source for Air Plasma Cutting process.
Special no-hf cutting torch with pilot arc allows 25mm maximum cuts on mild steel, making this model the most performant, compared to other plasma cutters on the market.
The PFC module allows multiple advantages such as reduced power consumption, increased efficiency, increased duty cycle (40A @ 50%) and multi-voltage capability (works with any voltage between 95V and 270V).
MAIN FUNCTIONS
AIR PLASMA CUTTING
Capable of cutting the most common metals like mild steel, stainless steel, aluminium, copper, etc.
PILOT ARC
No contact torch with Pilot Arc allows cutting work pieces with holes and even grid.
IGBT INVERTER TECHNOLOGY
Differently from traditional AC transformer system, guarantees cutting edge technology in welding, specifically by providing better arc stability, lower current consumption, compact equipment size and lightweight.
MCU CONTROL SYSTEM
(INTELLIGENT MACHINE CONTROL)
A built-in microprocessor for real time monitoring of the arc and machine protection detection.
PFC TECHNOLOGY
Power Factor Correction allows multiple advantages such as energy saving, welding and cutting arc stability, increased duty cycle and a wide input voltage range.
GENERATOR FRIENDLY
Can be connected to Power Generators.
IMPROPER INSTALLATION AND
AIR
PRESSURE LOW ALARM
When short circuit occurred between the electrode and the nozzle for abnormal reasons, the lamp on , air feeds intermittently. When cutting gun with no electrode and nozzle installed, the lamp on, air feeds intermittently.
When the Shield Cup is not installed, the lamp flashes. When the air low, the lamp on.
EXCELLENT ARC STABILITY
Smooth and reactive welding arc for superior ignition, penetration and welding quality.
LIGHTWEIGHT & PORTABLE
Only 480x146x278mm and 7Kg.
FAN COOLED
Powerful fan and special internal engineering design for efficient cooling and keeping the impurities and dust away from sensitive electronic parts.
AIR PLASMA CUTTING
Capable of cutting the most common metals like
mild steel, stainless steel, aluminium, copper, etc.
PILOT ARC
No contact torch with Pilot Arc allows cutting work
pieces with holes and even grid.
IGBT INVERTER TECHNOLOGY
Differently from traditional AC transformer system,
guarantees cutting edge technology in welding, specifically
by providing better arc stability, lower current consumption,
compact equipment size and lightweight.
MCU CONTROL SYSTEM
(INTELLIGENT MACHINE CONTROL)
A built-in microprocessor for real time monitoring of the arc
and machine protection detection.
PFC TECHNOLOGY
Power Factor Correction allows multiple advantages
such as energy saving, welding and cutting arc stability,
increased duty cycle and a wide input voltage range.
GENERATOR FRIENDLY
Can be connected to Power Generators.
IMPROPER INSTALLATION AND
AIR
PRESSURE LOW ALARM
When short circuit occurred between the electrode and the
nozzle for abnormal reasons, the lamp on , air feeds
intermittently. When cutting gun with no electrode and nozzle
installed, the lamp on, air feeds intermittently.
When the Shield Cup is not installed, the lamp flashes.
When the air low, the lamp on.
EXCELLENT ARC STABILITY
Smooth and reactive welding arc for superior ignition,
penetration and welding quality.
LIGHTWEIGHT & PORTABLE
Only 480x146x278mm and 7Kg.
FAN COOLED
Powerful fan and special internal engineering design for
efficient cooling and keeping the impurities and dust away
from sensitive electronic parts.
